Puppy paw photo magnet

Here's how to make a unique magnet that holds pictures of your favorite puppy! You will need a 2 x 2 photograph.

Supplies

1 sheet of black craft foam (2mm thick)
1 sheet of white craft foam
1 sheet of black felt
glue
scissors
exacto knife (optional)
pen or marker
1 roll of magnet with adhesive stripping on one side

Step 1: Print out templates. Cut out templates, including the squares in the middle.

Step 2: Use template A for black foam and template B for white foam and trace onto foam.

Step 3: Cut out both pieces including the squares and paste white foam on top of black foam.

Step 4: Using the black foam, trace and cut out accent pieces for puppy paw and paste to white foam.

Step 5: Cut out a square piece of black felt so that it extends over backside of frame.

Step 6: Paste edges of felt to black foam except for the top edge so that the picture can be inserted.

Step 7: Finally, cut two 1-inch pieces of magnet, peel of backing, and stick on the top and bottom of the paw print.